Group 3 Copy 7 Created with Sketch. Path 5 Copy Created with Sketch. Group Created with Sketch.

RoboMaster Development Board Type C

RoboMaster Development Board Type C SPECS

  • Performance Parameters

    Input Voltage: 8-28V

    Standby Current: 0.01A @ DC 24V

    Operating Temperature: 0° to 55° C

    Power Input Port: 1

    Power Outlet Port: 3

    IMU+E-compass: 1

    CAN Port: CAN1: 2; CAN2: 2

    UART Port: 2

    PWM Port: 7

    DBUS Port: 1

    USB Port: 1

    IIC Port: 1

    SPI Port: 1

    Digital Camera Port: 1

  • Structure Parameters

    Weight: 38 g

    Dimensions: 60×41×16 mm

    XT30 Power Cable Length: 450mm

    2-pin CAN Cable Length: 350mm

    4-pin CAN Cable Length: 350mm

    SWD Cable Length: 100mm

RoboMaster Development Board Type C DOWNLOADS

DOCUMENTS & MANUALSSOFTWARE
Oops!nothing here,yet.

RoboMaster Development Board Type C FAQ

  • QHow can I download programs to the development board?

    ➥AUse a debugger with an SWD port such as J-link or ST-link to download programs to the RoboMaster Development Board Type C. Alternatively, users can download programs via USB port by configuring BOOT pins and entering DFU mode.

  • QWhat can I do if programs fail to download through the SWD port?

    ➥A1. Make sure the SWD download cable is connected properly; 2. Make sure the development board is powered normally; 3. Make sure the SWD download configuration is correct.

  • QCan I power the development board with a 3S Li-Po?

    ➥AYes. The RoboMaster Development Board Type C supports 8-28V DC power supply. For more information, please refer to the "RoboMaster Development Board Type C User Manual."

  • QDoes the RoboMaster Development Board Type C support any example programs?

    ➥AYes. RoboMaster offers various tutorials and open source example programs for users on the Github platform. For more information, please go to www.github.com/robomaster.

  • QDoes the development board have any factory demo programs pre-installed?

    ➥AThe RoboMaster Development Board Type C already contains pre-installed factory programs before shipment, which can also be downloaded from the official website.

  • QWhat should I do if certain peripherals of the development board do not work?

    ➥ATest with the corresponding official example program. If the test fails, please contact our aftersales service for repair.

  • QDoes the development board support a camera input?

    ➥AYes. The development board can be connected with a camera via the DCMI port. For more detailed information, please refer to the“RoboMaster Development Board Type C User Manual.”