RoboMaster 2020 Robotics Competition Final Robot Assessment Video Instruction

2020-05-29

I. Abstract

The Final Robot Assessment Video is an important step in the technical assessment for the RoboMaster 2020 Robotics Competition.

The marks from the Rules Exam will be used as a basis for deciding on each team’s self-selected competition region for the China Regional Competition of RoboMaster 2020 Robotics Competition and the setup of their seed teams.

II. Submission Requirements

1.Submission time: September 10, 2020, 12:00 - September 12, 2020, 12:00(UTC+8) （Tentative time）

2.Submission opportunity: Once

3. Video submission method:

1) Download the cost report template and fill it according to the actual situation（the attachment needs to be Improved and submit the cost BOM that has been submitted in the Mid-term Robot Assessment Video）, and record the video according to the requirements of the review rules;

2) Upload the video to Youku/YouTube and set an access password;

3) Submit the video URL, access password and cost report through the registration system.

4）Basic Requirement:

Display the basic funtions of Standard, Hero and Engineer, which have protective shell and unexposed wires.

Submit the cost report of the whole team.

III. Video Requirements:

1.Name of university/college, shooting date and location must be stated at the beginning of the video;

2.Subtitles or commentaries should be included to explain each process in the video;

3.The video should only contain relevant content and maintain a tight pace, with its length controlled within 3 minutes;

4.The video’s resolution must be higher than 720p.

IV.Assessment Requirements:

1. The teams will be ranked according to their total marks for the video and BOM Form, and will pass the assessment according to a certain percentage.

2. Different requirements and scoring standards apply to different items as set out in the table below:

Item	Content might be included	Score	Basic Function
Standard	Complete movement: panning, spinning	5	l Able to move normally without exceeding power limit l Able to attack l Meet the installation specifications for the Referee System
	Climbing a 15° slope and displaying power consumption data in real time	5
	Launching 50 rounds of projectiles continuously from the magazine to attack a target with the size of a Large Armor Module at 5 meters away, and calculating the hit rate	10
	Automatically recognizing and tracking an armor module	5
	Striking a Power Rune	5
	Steadily passing over a Launch Ramp	5
	Demonstrating the installation of the Referee System (or the installation spot reserved for the Referee System)	5
Hero	Complete movement: panning, spinning	5
	Climbing a 15° slope and displaying power consumption data in real time	5
	Launching 20 rounds of 42mm projectiles or 50 rounds of 17mm projectiles continuously from the magazine to attack a target with the size of a Large Armor Module at 5 meters away, and calculating the hit rate	10
	Automatically recognizing and following an armor module	5
	Demonstrating the installation of the Referee System (or the installation spot reserved for the Referee System)	5
Engineer	Complete movement	5	l Able to move normally l Able to obtain projectiles l Meet the installation specifications for the Referee System
	Grabbing a Projectile Container to obtain projectiles	10
	Handing over and receiving projectiles with Standard and Hero	5
	Reviving Standard and Hero with a RFID Card	5
	Rescuing Standard and Hero	5
	Launching 50 rounds of projectiles continuously from the magazine	5
	Demonstrating the installation of the Referee System (or the installation spot reserved for the Referee System)	5
Sentry	Moving on a Sentry Rail	5	l Able to move normally without exceeding the power limit l Able to attack l Meet the installation specifications for the Referee System
	Launching 50 rounds of projectiles continuously from the magazine to attack a target with the size of a Large Armor Module at 5 meters away, and calculating the hit rate	10
	Automatically recognizing and following an armor module	5
	Mounting the robot onto and removing it from the Sentry Rail	5
	Demonstrating the installation of the Referee System (or the installation spot reserved for the Referee System)	5
Aerial	Displaying fully enclosed propeller cage	5	l Has fully enclosed propeller cage l Able to move normally without exceeding the power limit l Meet the installation specifications for the Referee System
	Complete movement: take-off, movement, hovering, landing	10
	Launching 50 rounds of projectiles continuously in flight to attack a target with the size of a Large Armor Module at 5 meters away, and calculating the hit rate	5
	Demonstrating the installation of the Referee System (or the installation spot reserved for the Referee System)	5
Dart System	Adjusting the angles of pitch and yaw axes of the Dart Launcher	5	l Able to launch dart normally l Meet the installation specifications for the Referee System
	Loading and launching dart	5
	Launching dart to attack a target at an Outpost’s distance	10
	Demonstrating the installation of the Referee System (or the installation spot reserved for the Referee System)	5
Others	Demonstration of other special functions	-	Extra points will be given according to the actual effect

Module	Content	Scoring Criteria	Score
Cost Summary	Cost overview, budget, budget that has been used, subsequent budget plan of the current season, sustainable development plan of the next season	Reliable data and reasonable plan	20
Cost Analysis	Analyze the proportions according to technic type, technical direction or robot type The fulfillment of expectation, reason of error, subsequent solutions	Can analyze and reflect the core pain problems and have reasonable subsequent solutions	50
Attachment	Improve the cost BOM that has been submitted in the Mid-term Robot Assessment Video	Clear module classification Reliable and complete content Visual data presentation	30

V.Privilege Granted:

The team will receive permission to borrow the full referee system and qualify for the China Regional Competition.